What Do We Know About Metal Recycling Rates?

The recycling of metals is widely viewed as a fruitful sustainability strategy, but little information is available on the degree to which recycling is actually taking place. This article provides an overview on the current knowledge of recycling rates for 60 metals. We propose various recycling metrics, discuss relevant aspects of recycling processes, and present current estimates on global end‐of‐life recycling rates (EOL‐RR; i.e., the percentage of a metal in discards that is actually recycled), recycled content (RC), and old scrap ratios (OSRs; i.e., the share of old scrap in the total scrap flow). Because of increases in metal use over time and long metal in‐use lifetimes, many RC values are low and will remain so for the foreseeable future. Because of relatively low efficiencies in the collection and processing of most discarded products, inherent limitations in recycling processes, and the fact that primary material is often relatively abundant and low‐cost (which thereby keeps down the price of scrap), many EOL‐RRs are very low: Only for 18 metals (silver, aluminum, gold, cobalt, chromium, copper, iron, manganese, niobium, nickel, lead, palladium, platinum, rhenium, rhodium, tin, titanium, and zinc) is the EOL‐RR above 50% at present. Only for niobium, lead, and ruthenium is the RC above 50%, although 16 metals are in the 25% to 50% range. Thirteen metals have an OSR greater than 50%. These estimates may be used in considerations of whether recycling efficiencies can be improved; which metric could best encourage improved effectiveness in recycling; and an improved understanding of the dependence of recycling on economics, technology, and other factors.     

Salt marsh harvest mouse demography and habitat use in the Suisun Marsh,California

We undertook a 2-year (2002–2004) mark–recapture study to investigate demographic performance and habitat use of salt marsh harvest mice (Reithrodontomys raviventris halicoetes) in the Suisun Marsh. We examined the effects of different wetland types and microhabitats on 3 demographic variables: density, reproductive potential, and persistence. Our results indicate that microhabitats dominated by mixed vegetation or pickleweed (Salicornia spp.) supported similar salt marsh harvest mouse densities, reproductive potential, and persistence throughout much of the year, whereas few salt marsh harvest mice inhabited upland grass-dominated microhabitats. We found that densities were higher in diked wetlands, whereas post-winter persistence was higher in tidal wetlands, and reproductive potential did not differ statistically between wetland types. Our results emphasize the importance of mixed vegetation for providing adequate salt marsh harvest mouse habitat and suggest that, despite their physiognomic and hydrological differences, both diked and tidal wetlands support salt marsh harvest mouse populations by promoting different demographic attributes. We recommend that habitat management, restoration, and enhancement efforts include areas containing mixed vegetation in addition to pickleweed in both diked and tidal wetlands. © 2011 The Wildlife Society.     

Mobilization of iron from ferritin by isolated mitochondria effects of species compatibility between ferritin and mitochondria and iron content of ferritin

Mitochondria mobilize iron from ferritin by a mechanism that depends on external FMN. With rat liver mitochondria, the rate of mobilization of iron is higher from rat liver ferritin than from horse spleen ferritin. With horse liver mitochondria, the rate of iron mobilization is higher from horse spleen ferritin than from rat liver ferritin. The results are explained by a higher affinity between mitochondria and ferritins of the same species. The mobilization of iron increases with the iron content of the ferritin and then levels off. A maximum is reached with ferritins containing about 1 200 iron atoms per molecule. The results represent further evidence that ferritin may function as a direct iron donor to the mitochondria.     

Solubility characteristics of Micrococcus lysodeikticus membrane components in detergents and chaotropic salts analyzed by immunoelectrophoresis

In order to evaluate the effectiveness and selectivity of various reagents in the solubilization of bacterial membranes, membranes of Micrococcus lysodeikticus were treated with detergents and chaotropic agents. The composition of the extracts so obtained was analyzed by rocket and two-dimensional immunoelectrophoretic techniques. Recovery of succinate-, malate-, and reduced nicotinamide adenine dinucleotide- (NADH) dehydrogenases, ATPase, succinylated lipomannan and cytochromes in the extracts was measured. Treatment with a variety of non-denaturing detergents produced extracts that were generally qualitatively uniform although quantitative differences were observed. The degree of extraction of various components was correlated with the hydrophile-lipophile balance. Several chaotropic agents were also evaluated as reagents for membrane solubilization. These agents were less effective in extraction of bulk protein, but produced extracts enriched in some membrane components.     

Determination of trace levels of fatty acid metal salts by high-performance liquid chromatography with fluorescence prelabeling

A simple method is described for picomole determinations of fatty acid metal salts. Fatty acid salts are directly labeled with 4-bromomethyl-7-methoxycoumarin in the presence of excess ethylenediaminetetraacetic acid tripotassium salt without any solvent extractions. The fluorescence derivatives of fatty acids are separated by reverse-phase high-performance liquid chromatography followed by fluorometric detection. The response of each fatty acid (C8-C18) calcium salt is linear from 1 to 50 micrograms/ml of samples. The detection limit is about 7 pmol. Good recoveries are obtained for the calcium salts of myrystic acid and soap (C8-C18, C18:1,2). The new method is successfully applied to the study on biodegradation of fatty acids in river water.     

Trace elements in rock salt and their bioavailability estimated from solubility in acid

In this study, 18 partly commercially available samples of rock salt from Austria, Germany, Pakistan, Poland, Switzerland, and Ukraine were investigated with respect to their content of trace elements using instrumental neutron activation analysis. Elements detected were Al, Ba, Br, Ca, Ce, Cl, Co, Cr, Cs, Eu, Fe, Hf, La, Mn, Na, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Th, and Zn, some of them only in individual cases. An estimation of the bioavailability of these trace elements was performed by dissolving an equivalent of the sodium chloride samples in diluted hydrochloric acid (simulating stomach acid), filtering off the insoluble components, and analyzing the evaporated filtrate. It could be shown that in most cases bioactive trace elements like Fe can be found in rock salt in the form of almost insoluble compounds and are therefore not significantly bioavailable, whereas thorium, for example, was partly bioavailable in two cases. A significant contribution to the recommended daily intake of metal trace elements by using rock salt for nutrition can be excluded.     

Distinct feeding strategies of generalist and specialist spiders

1. Feeding behaviour of generalist and specialist predators is determined by a variety of trophic adaptations. Specialised prey‐capture adaptations allow specialists to catch relatively large prey on a regular basis. As a result, specialists might be adapted to exploit each item of prey more thoroughly than do generalists. 2. It was expected that obligatory specialist cursorial spiders would feed less frequently than generalists but for a longer time and, thus, that their foraging pause would be longer. First, the feeding frequencies of three generalist spider species (Cybaeodamus taim, Harpactea hombergi, Hersiliola sternbergsi) were compared with those three phylogenetically related specialist species: myrmecophagous Zodarion rubidum, and araneophagous Nops aff. variabilis and Palpimanus orientalis. 3. Generalists captured more prey, exploited each item of prey for a significantly shorter time, and had a shorter foraging pause than was the case for specialists. Generalists also gained significantly less relative amount of prey mass than did specialists. 4. Second, the study compared the prey DNA degradation rate in the gut of generalists and specialists by means of PCR. The degradation rate was not significantly different between specialists and generalists: the detectability half‐life was estimated to exist for 14.3 days after feeding. 5. This study shows that the feeding strategies of cursorial generalist and obligatory specialist spiders are different. Obligatory specialists have evolved a feeding strategy that is based on thorough exploitation of a few large prey, whereas generalists have evolved a strategy that is based on short exploitation of multiple small items of prey.     

DNA content of spermatozoa in different genetic lines of turkeys

The variability of DNA content in turkey spermatozoa of four different lines and its correlation with body weight and sperm concentration were studied. In lines selected for lower body weight the DNA content was 2.034 and 2.036 pg per spermatozoon. In lines selected for higher body weight the DNA content was 2.267 and 2.370 pg per spermatozoon. Sperm concentration in 1 mm³ of semen, however, was higher in lines with a lower body weight (6.08–6.21 million) in comparison with lines selected for higher body weight (5.46–5.67 million). The correlations between the DNA content and sperm concentration were negative (r ranged from ?.457 to ?.860).     

Evaluation of integrating topographic wetness index with backscattering coefficient of TerraSAR-X image for soil moisture estimation in a mountainous region

The estimation of soil moisture by using the backscattering coefficient of radar in a mountainous region is a challenging task due to the complex topography, which impacts the distribution of soil moisture and changes the backscattering coefficient. Complicated terrain can disturb empirical moisture estimation models, thereby, the resulting estimates of soil moisture are very unlikely reliable. This article proposed an innovative way of integration of the topographic wetness index (TWI) and the backscattering coefficient of soil obtained from the TerraSAR-X image, which improves the accuracy of measurement of the soil moisture. The standard estimation error and the coefficient of determination from the model were used to evaluate the performance of TWI. Our results show that the standard estimation error was decreased from: (1) 4.0% to 3.3% cm³ cm⁻³ at a depth of 5 cm and (2) 4.5% to 3.9% cm³ cm⁻³ at a depth of 10 cm. The most reliable estimation was observed at a depth of 5 cm, when it was compared with those of 0–5 cm, 10 cm and 15 cm. The TWI from the digital elevation model (DEM) is useful as a constraint condition for modeling work. This article concludes that the integration of the backscattering coefficient of soil with TWI can significantly reduce the uncertainty in the estimation of soil moisture in a mountainous region.